Русский
Bahasa Indonesia
Việt
Español
Product Details of BDF Assembled Water TanksDesignModular Structure: BDF assembled water tanks feature a modular design. Each module is precisely fabricated, allowing for easy connection and disassembly. This design not only simplifies the installation process but also enables convenient transportation. The modules can be easily transported to the installation site and assembled on - site, saving both time and effort.High - Quality Plates: The tank is made of high - grade stainless steel and galvanized steel plates.
Contact Now
This is a fiberglass fire-fighting water tank with the dimensions of 5 meters in length, 4 meters in width and 1 meter in height. The water tank is installed underground without being covered by earth. It is used to store fire-fighting water. The surrounding of the water pit is built up with red bricks, which is also to save space and avoid occupying too much area.The SMC prefabricated fiberglass reinforced plastic water tank is assembled on-site using SMC molded panels, sealing materials, metal structural components, and piping systems.
Contact Now
Introduction to Our BDF Fabricated Assembled TankCustomization: We understand that every project is unique, so we offer customized solutions for our BDF water tanks. Our professional team can work with you to design and manufacture a tank that meets your specific needs.Installation and Maintenance: Our company provides comprehensive installation and maintenance services. Our experienced technicians will ensure that the tank is installed correctly and operates smoothly. We also offer regular maintenance services to keep the tank in good condition.I.
Contact Now
Product Details of Fiberglass Reinforced Plastic Water TankMaterial Composition:The SMC assembled water tank is a new - type water tank adopted internationally at present, and it is assembled from integral high - quality SMC water tank plates.The SMC water tank is mainly composed of glass fiber and resin. The glass fiber provides high strength and rigidity, enhancing the mechanical properties of the tank. The resin acts as a binder, ensuring the integrity and durability of the structure.
Contact Now
Product Details of Large Fiberglass Water TankInstallation of large fiberglass tanks requires careful site preparation. A level and stable foundation, usually made of concrete, is essential. The tanks can be installed above ground, partially buried, or fully buried depending on the specific requirements of the project. Professional installation teams are often needed to ensure proper alignment and connection of inlet, outlet, and other fittings.These tanks are available in substantial sizes, with capacities ranging from several cubic meters to hundreds of cubic meters.
Contact Now
Product Details of Assembled Stainless Steel Water TankStructural Design and ComponentsPrefabricated stainless-steel water tanks are composed of multiple pre-cut and pre-formed stainless-steel panels. These panels are typically made of high-quality stainless steel grades, such as 304 or 316, which offer excellent corrosion resistance. The panels are designed with flanges and grooves that allow for precise alignment and connection during assembly. The tank usually consists of side panels, bottom panels, and a top cover.
Contact Now
Product Description:The SMC prefabricated fiberglass water tank is assembled on-site using SMC molded panels, sealing materials, metal structural components, and piping systems. This design offers great convenience for both design and construction. Standard water tanks are typically designed according to established specifications, while custom tanks can be specially designed as needed. The tank can be assembled to a capacity range of 0.125 to 1500 cubic meters based on user requirements.
Contact Now
Product Details of FRP Square Style Water TankMaterialMade from high-quality fiberglass and advanced resin, this tank combines the strength of fiberglass with the corrosion-resistant properties of resin. The fiberglass reinforcement provides structural integrity, making it durable and able to withstand different environmental conditions.Performance and DurabilityThe FRP square water tank exhibits excellent resistance to corrosion, rust, and UV radiation. It can maintain its performance and appearance over a long period.
Contact Now
Modular Fiberglass Water Tank Product DetailsThe modular fiberglass water tank is a high - performance water storage solution designed for various applications, from residential to industrial use. It combines the advantages of fiberglass materials with a modular design concept, offering flexibility, durability, and easy installation.This is a fiberglass modular water tank with a length of 22 meters, a width of 5 meters and a height of 4 meters.
Contact Now
Product Details of Building Block Fiberglass Water TankModular Design: Composed of pre - fabricated FRP modules, allowing for easy assembly and disassembly. This design enables flexible installation according to different site conditions and space requirements.Reinforced Structure: The tank body is reinforced with fiberglass materials, providing high strength and load - bearing capacity. It can withstand significant water pressure and external impacts.Modular Fiberglass Reinforced Plastic (FRP) Water TanksModular FRP water tanks are innovative storage solutions.
Contact Now
Product Details of Fiberglass Modular Water TankModular Design: Composed of pre - fabricated FRP modules, allowing for easy assembly and disassembly. This design enables flexible installation according to different site conditions and space requirements.Reinforced Structure: The tank body is reinforced with fiberglass materials, providing high strength and load - bearing capacity. It can withstand significant water pressure and external impacts.High - quality FRP: Made from premium fiberglass raw materials, which are corrosion - resistant, rust - proof, and have excellent chemical stability.
Contact Now
Our company, as a leading water tank manufacturer, places the highest emphasis on product quality. We utilize advanced production technologies and strict quality control procedures throughout the manufacturing process. From the selection of premium raw materials to the precise assembly and thorough inspection of each tank. Fiberglass Reinforced Plastic (FRP): The main material of the tank is FRP, which consists of a matrix of thermosetting resin (such as polyester or vinyl ester) reinforced with fiberglass fibers.
Contact Now
Fiberglass Tank for Water KeepingThe surface of the tank can have a smooth finish, which is not only aesthetically pleasing but also easy to clean. Some tanks may also have a textured or anti - slip surface depending on the application and safety requirements.Surface Finish: The outer surface can be smooth or have a textured finish.
Contact Now
This is a fiberglass - reinforced plastic fire - fighting water tank with dimensions of 10 * 5 * 4. The bottom plate of the water tank and its sides one and two are assembled with small plates sized 1 * 1, while side three is made of large plates sized 1 * 1.5 meters. The outside of the water tank needs external reinforcement, and the inside of the tank is fixed with tie bars for support. The channel steel used is galvanized channel steel.Physical Properties: They have high strength and can withstand relatively large pressures.
Contact Now
Fiberglass Water Tank Details A fiberglass water tank is a popular choice for water storage solutions. It is constructed using fiberglass reinforced plastic (FRP), which combines the strength of glass fibers with the durability of plastic resins.Design and Construction: -These tanks can be custom-designed to fit specific space requirements and volume needs. They are available in different shapes, such as cylindrical, rectangular, or square.- The modular or sectional construction of many fiberglass tanks allows for easy assembly on-site, reducing installation time and cost.
Contact Now
Fiberglass Water Storage Tank In the realm of water storage solutions, the significance of a reliable and high - quality water tank cannot be overstated. Whether it's for domestic use, commercial establishments, or industrial applications, the water tank serves as a crucial component in ensuring a stable and clean water supply.
Contact Now
The product advantages of Fiberglass Storage Tanks LightweightFiberglass water tanks are much lighter than those made of concrete or steel. This makes them easier to transport and install. For example, a large - sized FRP water tank can be moved to the installation site with relative ease using common lifting equipment, while a similar - sized concrete tank would require much more complex and heavy - duty transportation and installation means. High - strength and DurableThe fiberglass reinforcement gives the tank excellent mechanical strength.
Contact Now
Product Details of Fiberglass Potable Water TanksMaterial CompositionFiberglass reinforced plastic (FRP) is the main material. It consists of a matrix of resin and reinforcing fibers. The resin commonly used is polyester, vinyl ester or epoxy resin, which provides chemical resistance and binds the fibers together. The reinforcing fibers, usually glass fibers, enhance the strength and rigidity of the tank.Environmental AdaptabilityFiberglass drinking water tanks can adapt to various environmental conditions.
Contact Now
This is a 12-cubic-meter fire water tank with a length, width and height of 3 * 2 * 2 respectively. The tank plates are 1 * 1 and assembled with screws. It is made of painted channel steel.Our company operates state-of-the-art manufacturing facilities equipped with advanced production lines. With a large-scale production base spanning [X] square meters, we can efficiently produce [product name] at a high volume.
Contact Now
These are two finished enamel steel plate water tanks with the dimensions of 2 * 1.5 * 2. They are assembled in the factory and then transported to the customer's site. The installation cost is relatively low. Generally, for small water tanks, if they can be transported into the site, it is better to assemble them in our factory and then ship them over, which can reduce costs.Product OverviewOur enamel steel plate water tank is a top - notch water storage solution, engineered with precision and built to last.
Contact Now
Galvanized Water Tank Product DetailsMaterial and StructureThe galvanized water tank is mainly constructed with high-quality galvanized steel sheets. These sheets are carefully selected to ensure durability and strength. The tank is typically assembled by welding or using bolted connections, depending on the specific design and size requirements.
Contact Now
This is a glass fiber reinforced plastic (FRP) water tank which is 16 meters long, 10 meters wide and 3 meters high. The water tank is assembled from SMC molded panels, with 1-meter-by-1-meter plates, together with sealing materials and metal structures. The FRP water tank has the highest cost-performance ratio and enjoys a relatively long service life.
Contact Now
Product Details of BDF Square Underground Water TankInstallation ProcessInstallation of BDF square underground water tanks requires careful site preparation. First, an appropriate excavation is made according to the tank's dimensions. The bottom of the excavation is leveled and a suitable foundation, such as a concrete base, may be laid to provide a stable support. The tank components are then transported to the site and assembled in the excavation. The bolts are tightened to the correct torque to ensure a secure connection.
Contact Now
This is an enamel steel plate fire-fighting water tank with the length, width and height of 5.5 * 3.5 * 2 respectively. The customer uses it to store fire-fighting water. The screw-assembled water tank is chosen. The side plates of the water tank are composed of plates with the sizes of 1 * 1.5 and 0.5 * 0.5. The channel steel is the 8# enterprise standard channel steel.Quality Assurance and After-sales Service:We are committed to providing customers with top-notch products and comprehensive after-sales support.
Contact Now
