What is the function of the bulge on the stainless steel insulated water tank?

It is not difficult for us to see stainless steel insulated water tanks in our lives. Generally, square and round water tanks are more common. The raised part of the square stainless steel insulated water tank template is stamped with a mold. The specific main reasons for this convex design are as follows:

1.Increase the compressive strength of the water tank wall and enhance the bearing capacity of the water tank boundary layer.

As we all know, stainless steel insulated water tanks are made of stainless steel plates. If the convex design is not adopted, the wall of the water tank will bulge due to the pressure of the water, so we simply design it into a bulging convex shape, which is an application of structural mechanics.

2.Increase the total volume of the lifting water tank. The reason why it is designed to protrude from the outer barrel is that the outer barrel can greatly increase the volume of the water tank.

3.Enhanced welding performance

If the bulging scheme is not adopted, the plate welded by argon arc welding in our assembly will inevitably not be able to withstand high temperature and deform; the convex design scheme can effectively disperse the strain judgment during welding and keep the shape as it is.

4.Reduce the thermal expansion effect.

If there is hot water stored at a higher temperature, the thermal expansion effect can be reduced.

5.The cabinet has a beautiful and generous appearance.

The overall appearance of the water tank is more beautiful and generous.