Русский
Bahasa Indonesia
Việt
Español
Fiberglass Insulated Water Tank
Fiberglass insulated water tank, our Dafeng fiberglass water tank manufacturing technology is a new type of water tank adopted internationally. Assembled from high-quality SMC water tank panels as a whole. Its characteristic is the use of food grade resin, so the water quality is good, clean and pollution-free; It has the characteristics of high strength, light weight, corrosion resistance, beautiful appearance, long service life, and convenient maintenance and management. Welcome new customers to inquire!
Precautions for installation of fiberglass insulated water tank:
There are many installation precautions to be taken when installing fiberglass insulated water tanks. Proper installation is necessary for longer use of the water tank. Please pay attention to the following precautions during installation:
1.When placing the insulated water tank on the roof, stainless steel mirror reflection should be placed to affect the surrounding office or living environment.
2. The foundation for placing the insulated water tank needs to be level, and there should be no water accumulation on the foundation plane; If employed The bracket welded with steel or channel steel must be laid flat with steel plates at the location where the water tank is placed.
3. Circular insulated water tanks should be placed upright and not horizontally.
4. The installation and maintenance space around the water tank should be greater than 600mm, as the circulating water pump configured for the unit does not have suction capacity. Therefore, the installation position of the water tank should not be lower than the unit. Considering the limited head, it should not be too high than the unit. If conditions permit, it is best to place it at the same level.
5. For floor engineering, regardless of the size of the water tank, it must be placed on a load-bearing beam: if the water tank exceeds 5 tons, the customer is required to do so The load-bearing foundation should have a load-bearing capacity greater than twice the weight of the water tank after it is filled with water; Floor width or water When the box is relatively large, it is recommended that the customer divide the water tank into multiple parts and place them on the load-bearing beam.
6. For the installation of insulated water tanks on the ground, a horizontal foundation with a height of 150mm or more must be made, and the placement of the water tank should not affect the surrounding residents.
7. The insulated water tank can be installed on flat roofs, floors, or household series, and can also be installed on outdoor balconies or indoors The kitchen, bathroom, and other locations.
8. The installation position of the insulated water tank should be convenient for drainage from the sewage outlet, and the hot water tank should be installed as close as possible to the water point and the main unit Position to reduce pipeline heat loss.
The usage time of fiberglass insulated water tank:
The service life of fiberglass water tanks depends on the selection of fiberglass insulation water tank materials,installation methods of plate thickness, equipment environment, and maintenance during use. Due to many human external factors, the standard service life varies. The fiberglass insulated water tank is made of fiberglass insulated water tank material, which has the advantages of high strength and corrosion resistance.
